CAD (0)
  • Cart is empty
PEM Type MSO4 self-clinching microPEM® standoffs are used to stack or space internal components and provide strong, permanent, and reusable load-bearing threads in metal sheets as thin as .012” / 0.3mm. Thread sizes have been developed as small as M1 and available unified fastener lengths are .094” and .125” and 2mm and 3mm in metric.
  • Become integral parts of an assembly by clinching permanently in place.
  • Will not loosen or fall out.
  • Can be installed into stainless steel sheets.
  • Can be installed automatically.
  • RoHS compliant.
1 - 10 of 10 | Results Per Page | View | Unit of Measure
1 

Part #

Thread Size x Pitch

Hole Size in Sheet + 0.05

C Max.

H Nom.

L +0.05 -0.08

Min. Dist. Hole C/L to Edge

CAD

Pitch

N/A M1 x 0.25 N/A 2.41 mm N/A 2.38 mm N/A 3.16 mm N/A 2 mm N/A 2.30 mm N/A N/A
N/A M1 x 0.25 N/A 2.41 mm N/A 2.38 mm N/A 3.16 mm N/A 3 mm N/A 2.30 mm N/A N/A
N/A M1.2 x 0.25 N/A 2.41 mm N/A 2.38 mm N/A 3.16 mm N/A 2 mm N/A 2.30 mm N/A N/A
N/A M1.2 x 0.25 N/A 2.41 mm N/A 2.38 mm N/A 3.16 mm N/A 3 mm N/A 2.30 mm N/A N/A
N/A M1.4 x 0.3 N/A 2.41 mm N/A 2.38 mm N/A 3.16 mm N/A 2 mm N/A 2.30 mm N/A N/A
N/A M1.4 x 0.3 N/A 2.41 mm N/A 2.38 mm N/A 3.16 mm N/A 3 mm N/A 2.30 mm N/A N/A
N/A M1.6 x 0.35 N/A 2.41 mm N/A 2.38 mm N/A 3.16 mm N/A 2 mm N/A 2.30 mm N/A N/A
N/A M1.6 x 0.35 N/A 2.41 mm N/A 2.38 mm N/A 3.16 mm N/A 3 mm N/A 2.30 mm N/A N/A
N/A M2 x 0.4 N/A 3.18 mm N/A 3.15 mm N/A 3.96 mm N/A 2 mm N/A 3 mm N/A N/A
N/A M2 x 0.4 N/A 3.18 mm N/A 3.15 mm N/A 3.96 mm N/A 3 mm N/A 3 mm N/A N/A
1 - 10 of 10 | Results Per Page | View | Unit of Measure
1