CAD (0) ▾
  • Cart is empty
  1. Request CAD files
  • Designed for high load applications. Designed for high load applications. Available with rib, key or full hex features for high torque applications.
Unit of Measure

Thread Size x Pitch

 M10 x 1.5

Grip Range

 8.00 - 10.50 mm

Identification Mark

 3 Rad.

B ± 0.38

 19.50 mm a1061_1.jpg

C Nom.

 2.23 mm

øD - 0.1

 12.44 mm

E Max.

 15.15 mm

F + 0.13

 3.05 mm
L ± 0.381 36.50 mm

J Ref.

 22.18 mm

K Ref.

 13.20 mm

Install Drill Size Ref.

 12.50 mm

Install Hole Size Min.

 12.50 mm

Install Hole Size Max.

 12.70 mm

Pull Up Factor

 3.94 mm

Fastening

 Installed

Thread Specification

 6H per ASME B1.13M

Standard Material

 Low Carbon Steel

Standard Finish

 Cadmium Plate - .0003” minimum thickness per SAE AMS-QQ-P-416 Class 2, Type II

CAD Supplier

 PennEngineering® (Atlas®)
  • 1 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”