CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
These standoffs, which use the proven self-clinching design, install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.

Unthreaded standoffs are also available for spacing multi-panel assemblies.
Unit of Measure

Thru-Hole Code

 N/A 8194

Length Code

 N/A 4

Material Code

 N/A A

Min. Sheet Thickness

 N/A .050 in

Hole Size in Sheet + .003 - .000

 N/A .281 in

B - Thru-hole Diameter + .004 - .003

 N/A .194 in a1350_1.jpg

C + .000 - .005

 N/A .280 in

H Nom.

 N/A .312 in
L - Length +.002 –.0051 N/A .125 in
Min. Dist. Hole C/L to Edge2 N/A .31 in
For Use in Sheet Hardness3 N/A HRB 50 / HB 82 or Less

Fastener Material

 N/A Aluminum

CAD Supplier

 N/A PennEngineering® (PEM®)
  • 1 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”
  • 2 To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.
  • 3 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.