CAD (0) ▾
  • Cart is empty
  1. Request CAD files
  • Single point hinging applications.
  • Can be also used for single point hinging applications (not primary use).
  • Type SFW fasteners are shipped with mating washers (made of carbon steel, Zinc Plated, 5µm, Colorless).
Unit of Measure

Panel 1 Thickness ±0.08mm/±.003in

 0.80 mm.031 in

Panel 1 Mounting Hole +0.08mm/+.003 –.000in

 3.00 mm.118 in
Panel 2 Thickness Min.1 0.80 mm.031 in

Panel 2 Mounting Hole +0.08mm/+.003 –.000in

 2.50 mm.098 in

C1 Max.

 2.98 mm.117 in
a1307_1.jpg

C2 Max.

 2.48 mm.097 in

E Max.

 3.53 mm.139 in
L Max.2 2.09 mm.082 in

Nominal Gap between Panels

 0.39-0.51 mm.015-.020 in
Min. Dist. Hole C/L to Edge3 2.54 mm.100 in

Material Fastener

Low Carbon Steel

Material Washer

 Carbon Steel

Finish Fastener

Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless plus sealant/lubricant

Finish Washer

 Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless
For Use in Sheet Hardness4 HRB 80 / HB 150 or less

CAD Supplier

 PennEngineering® (PEM®)
  • 1 Fastener will provide flush application at minimum sheet thickness.
  • 2 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”
  • 3 To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.
  • 4 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.