CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
These standoffs, which use the proven self-clinching design, install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.

Unthreaded standoffs are also available for spacing multi-panel assemblies.

Unit of Measure

Thru-Hole Code

 N/A 63.1

Length Code

 N/A 6

Min. Sheet Thickness

 N/A 1 mm

Hole Size in Sheet + 0.08

 N/A 5.41 mm

B - Thru-hole Diameter + 0.1 - 0.08

 N/A 3.1 mm a1350_1.jpg

C - 0.13

 N/A 5.39 mm

H Nom.

 N/A 6.4 mm
L - Length +0.05 –0.131 N/A 6 mm
Min. Dist. Hole C/L to Edge2 N/A 6.8 mm
For Use in Sheet Hardness3 N/A HRB 88 / HB 183 or Less

Fastener Material

 N/A 400 Series Stainless Steel

Standard Finish

 N/A Passivated and/or tested per ASTM A380

CAD Supplier

 N/A PennEngineering® (PEM®)
  • 1 The “L” dimension is the height of the installed stud at max grip. The height of the stud will increase if it is installed into thinner material. To calculate “actual L” use this formula: max grip - actual grip + L = “actual L”
  • 2 To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.
  • 3 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.