CAD (0)
  • Cart is empty
  • Features a low-profile.
  • Allows near-flush installations with no need for special hole preparations such as countersinking or dimpling.
  • Additional thread sizes and grip ranges available.
1 - 10 of 10 | Results Per Page | View | Unit of Measure
1 

Part #

Thread Size x Pitch

Grip Range

A ± 0.38

øD Max.

M Ref.

Fastening

CAD

N/A M4 x 0.7 N/A 0.50 - 2.00 mm N/A 9.78 mm N/A 6.32 mm N/A N/A Uninstalled N/A
N/A M4 x 0.7 N/A 0.50 - 2.00 mm N/A N/A 6.32 mm N/A 8.00 mm N/A Installed N/A
N/A M5 x 0.8 N/A 0.50 - 3.30 mm N/A 11.18 mm N/A 7.11 mm N/A N/A Uninstalled N/A
N/A M5 x 0.8 N/A 0.50 - 3.30 mm N/A N/A 7.11 mm N/A 8.38 mm N/A Installed N/A
N/A M6 x 1 N/A 0.76 - 4.20 mm N/A 14.73 mm N/A 9.50 mm N/A N/A Uninstalled N/A
N/A M6 x 1 N/A 0.76 - 4.20 mm N/A N/A 9.50 mm N/A 11.18 mm N/A Installed N/A
N/A M8 x 1.25 N/A 1.02 - 5.10 mm N/A 17.53 mm N/A 12.67 mm N/A N/A Uninstalled N/A
N/A M8 x 1.25 N/A 1.02 - 5.10 mm N/A N/A 12.67 mm N/A 13.72 mm N/A Installed N/A
N/A M10 x 1.5 N/A 1.02 - 5.10 mm N/A 17.53 mm N/A 12.67 mm N/A N/A Uninstalled N/A
N/A M10 x 1.5 N/A 1.02 - 5.10 mm N/A N/A 12.67 mm N/A 13.72 mm N/A Installed N/A
1 - 10 of 10 | Results Per Page | View | Unit of Measure
1